(16)6" riser block kit for Powematic 14" bandsaw
(2)Includes Magnetic Work Light - 25-870
131 1/2" Timber Wolf 1/4" 6PC Silicone Steel Low Tension Bandsaw blade for Curve, Template and Pattern Cutting or Ripping and Crosscutting
(3)Cool Blocks reduce heat, friction, and blade wear. Special graphite impregnated phenolic laminate blocks replace your standard steel upper and lower side blade guides which lubricates the blade without making it oily. You will notice the improved performance of your bandsaw with all blades, especially 1/8" wide blades for tight radius work. No bandsaw modification is required.
(32)Jet 6" riser block. Fits Jet 14" Bandsaws
(1)Universal band saw guide bearings. Set of 10 bearings only, no other hardware included. These bearing are used almost universally in band saws of all brands. If the outside diameter on your bearings are 15mm (.590") this is the replacement. Larger saws use 10 while smaller saws use 6.
(4)Cool Blocks reduce heat, friction, and blade wear. Special graphite impregnated phenolic laminate blocks replace your standard steel upper and lower side blade guides which lubricates the blade without making it oily. You will notice the improved performance of your bandsaw with all blades, especially 1/8" wide blades for tight radius work. No bandsaw modification is required.
(4)
PROFESSIONAL BAND SAW BLADES FOR HITACHI 10" TILTING HEAD BAND SAW
SuperCut BladeSaver Premium Bandsaw Tires are designed to replace the original tires on vertical woodcutting bandsaws. These tires are made in the USA of the best polyurethane available. These new tires will improve blade tracking, smoothness of cut, and improve blade life on import or domestic woodcutting bandsaws that use 14" wheels. Note: it is always best to replace both upper and lower tires at the same time.
(6)The Carter Cobra Coil will restore the tension available for resawing on bandsaws and may even improve the performance of new machines. The Carter Cobra Coil band saw tension spring replacement provides greater durability, superior strength and is a direct replacement for the spring in most 14" saws. The Cobra Coil gives you the ability to properly tension larger blades to give your 14" saw superior tracking over the stock spring that comes with most saws. This in turn allows you to make straighter more precise cuts.
(4)Trim both sides of your edge banding at once with the FastCap Quad Trimmer. Its double-edged cutters let you trim in either direction. Unique pneumatic system allows super smooth action rather than sticky conventional springs. Ergonomic trimmer body fits comfortably in your hand. Carbon steel blades.
(4)These Urethane Bandsaw Tires stretch to fit without glue making installation easy! Plus, urethane won't suffer from dry rot and because they're not made of the usual rubber, they'll stay flexible longer to increase the performance of your blade. The long-lasting tires improve blade tracking and work well with 1/16" blades. Their bright orange coloring makes them easy to inspect and they come with a lifetime warranty on the welds. Fits all 12'' bandsaws, including Jet, Craftsman, Ridgid and Delta.
Technical Details:
Improves blade tracking and extends blade life.
Won't dry rot.
Tire width may be trimmed to fit.
Installs easily without glue - simply stretch to fit.
Bright orange for easy blade inspection.
Long lasting even with 1/16'' blades.
Lifetime warranty on welds.
What's in the Box?
Two Urethane Bandsaw Tires
(3)Even under occasional use, the tires on band saw wheels periodically need to be replaced. Carter ULTRA BLUE Urethane Tires are made from the highest quality material to exacting standards. Thats why they deliver such outstanding performance and wear consistently for so long. Unlike rubber tires, which are cumbersome to replace, these slip on without any special tools, messy adhesives, or excessive downtime. Simply heat in hot soapy water and stretch the tire on to the wheel and the band saw is ready to use.
(15)Outlasts traditional rubber tires by a long shot! Because these are made of flexible urethane instead of the usual rubber, they stay pliable longer. This means better transfer of power to the blade and better cushioning. Your blades will last longer and your saw will perform better. And since you don't need to glue them to the wheel, installing and replacing is much easier, too. Bright orange color aids in blade inspection. Fits 14" Jet and Delta band saws and most other 14'' band saws.
105" Timber Wolf 1/8" 14HP Silicone Steel Low Tension Bandsaw blade for Scrolling work
(3)Use of a Saw Blade Lubricant prolongs blade life and produces smoother and quicker cuts. This wax stick is specially formulated to keep metal, plastic, and wood cutting blades from clogging because of chips or pitch. For use on all power and hand-held cutting tools including scroll, band, circular, hack, and jewelers saw blades. The lubricant stick measures 8" long x 1" in diameter. Keep a stick next to your band saw for resawing and another next to your scroll saw for stack cutting.
SuperCut BladeSaver Guide Blocks are self-lubricating and can be run with zero clearance on the blade. They are completely non-abrasive so that they will not dull the blade or disturb the set, even when they are in direct contact with the teeth. Skin packed 4 blocks per card - enough for one saw.
Install our bandsaw tension crank to adjust your blades to just the right tension as recommended. Make fine adjustments to your blade before use, and release the tension after your done cutting to prolong the life your bandsaw blade. The bandsaw tension crank does not work with band saws that are already outfitted with factory tension cranks. Fits most 14" models including Delta and Jet 12" and most import models.
